Washers

Circlip

A split ring that fits into a groove on a shaft or in a bore to locate or retain a component in the axial direction.

A circlip is a light, inexpensive way to retain a bearing, gear or collar without a shoulder or a threaded part. External rings sit in a shaft groove and internal rings sit in a bore groove, and the two are not interchangeable.

Success depends on the groove, not just the ring: groove diameter, width and edge distance must match the ring and the standard, and the ring must be fitted with the correct pliers and orientation. Confirm shaft or bore type, material and whether the ring is only for axial location or also has to take thrust.

Questions buyers ask

What is Circlip?

A split ring that fits into a groove on a shaft or in a bore to locate or retain a component in the axial direction.

What standards or terms are related to Circlip?

Also called: Retaining ring, Snap ring. Related terms: Dowel pin, Spring pin, Tolerance class. Related standards: DIN 471, DIN 472. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Washers

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.