Reference
The fastener standards decoder.
DIN, ISO and GB numbers overlap, and a purchase order can get lost between them. This table maps the common families so everyone is ordering the same part.
Standards guide
How to read the table
The DIN column is the German standard most European drawings use; ISO is the international equivalent; GB/T is the Chinese national standard. A part can meet all three without being identical in every dimension — always confirm the drawing.
DIN · ISO · GB/T
Common cross-references
Equivalent standards are a starting point, not a guarantee of dimensional identity. Confirm the drawing, grade and tolerance on the purchase order.
| Fastener | DIN | ISO | GB/T |
|---|---|---|---|
| Hex bolt, full thread | DIN 933 | ISO 4017 | GB/T 5783 |
| Hex bolt, partial thread | DIN 931 | ISO 4014 | GB/T 5782 |
| Hex nut | DIN 934 | ISO 4032 | GB/T 6170 |
| Nylon-insert lock nut | DIN 985 | ISO 10511 | GB/T 889.1 |
| Flat washer | DIN 125 | ISO 7089 | GB/T 97.1 |
| Spring washer | DIN 127 | — | GB/T 93 |
| Socket head cap screw | DIN 912 | ISO 4762 | GB/T 70.1 |
| Socket countersunk screw | DIN 7991 | ISO 10642 | GB/T 70.3 |
| Socket button head screw | — | ISO 7380 | GB/T 70.2 |
| Carriage bolt | DIN 603 | — | GB/T 12 |
| Flange bolt | DIN 6921 | — | GB/T 16674 |
| Threaded rod | DIN 975 | — | GB/T 901 |
| Self-drilling screw | DIN 7504 | — | — |
| Weld nut | DIN 929 | — | GB/T 13681 |
| Square nut | DIN 557 | — | GB/T 39 |
| Castle nut | DIN 935 | — | GB/T 6178 |
| Spring pin | DIN 1481 | ISO 8752 | — |
| Dowel pin | DIN 6325 | ISO 8734 | — |
| Blind rivet | DIN 7337 | — | — |
| Grease nipple | DIN 71412 | — | — |
| Oil plug | DIN 908 | — | — |
| Eye bolt | DIN 580 | — | — |
| U-bolt | DIN 3570 | — | — |
This table is a reference, not a supply list. Not every item is held in stock; every order is confirmed against the drawing and quantity.
Need a standard checked?
Send the drawing or the part number and we will confirm the closest equivalent.
Reference
Have a drawing? Send it.
Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.