What this standard covers
A headless rod threaded from end to end, cut to length and used with two nuts or screwed into a tapped part. GB/T 901 is the Chinese reference; the part has no head or plain shank to bear on.
How it differs from the closest standard
Its current metric reference is DIN 976-1, which is often quoted in place of DIN 975 for this product. Because the rod has no head, preload is applied through a nut at each end, and the usable clamping range is set by how the rod is cut.
Equivalent standards
| DIN | ISO | GB/T |
|---|---|---|
| DIN 975 | — | GB/T 901 |
How to specify it
- Send the standard number or drawing, including the edition you need.
- Confirm material, property class and finish.
- Confirm sizes, thread length, quantity and packing.
- Approve the sample or PO before production.
Questions buyers ask
What is DIN 975?
A headless rod threaded from end to end, cut to length and used with two nuts or screwed into a tapped part. GB/T 901 is the Chinese reference; the part has no head or plain shank to bear on.
What are the equivalent standards for DIN 975?
DIN 975 · GB/T 901. Its current metric reference is DIN 976-1, which is often quoted in place of DIN 975 for this product. Because the rod has no head, preload is applied through a nut at each end, and the usable clamping range is set by how the rod is cut.
Can you supply DIN 975 in 304 stainless or hot-dip galvanized?
Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Hot-dip galvanized, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.