STANDARD / DIN 603

DIN 603 — Carriage bolt

A bolt with a smooth dome head and a square neck under it, partly threaded; the square neck is drawn into timber and stops the bolt turning while the nut is tightened. GB/T 12 is the Chinese reference; there is no common ISO equivalent.

AT A GLANCE

Key facts

Standard
DIN 603
Family
Bolts & threaded rods
Equivalent standards
DIN 603 · GB/T 12
Common materials
Carbon steel, 304 stainless steel, Galvanized steel
Common finishes
Zinc plated, Hot-dip galvanized, Plain
Typical applications
Construction & steelwork, Furniture & joinery, General industry & MRO

What this standard covers

A bolt with a smooth dome head and a square neck under it, partly threaded; the square neck is drawn into timber and stops the bolt turning while the nut is tightened. GB/T 12 is the Chinese reference; there is no common ISO equivalent.

How it differs from the closest standard

Unlike a DIN 931 or DIN 933 hex bolt it has no wrench flats, so it can only be tightened from the nut side. Its locking depends on the square neck biting into wood, which is why it belongs in timber joints rather than steel-to-steel work.

Equivalent standards

DIN ISO GB/T
DIN 603 — GB/T 12

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 603?

A bolt with a smooth dome head and a square neck under it, partly threaded; the square neck is drawn into timber and stops the bolt turning while the nut is tightened. GB/T 12 is the Chinese reference; there is no common ISO equivalent.

What are the equivalent standards for DIN 603?

DIN 603 · GB/T 12. Unlike a DIN 931 or DIN 933 hex bolt it has no wrench flats, so it can only be tightened from the nut side. Its locking depends on the square neck biting into wood, which is why it belongs in timber joints rather than steel-to-steel work.

Can you supply DIN 603 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Hot-dip galvanized, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.