STANDARD / DIN 933

DIN 933 — Hex bolt, full thread

A hexagon head bolt threaded along the whole shank, up to the underside of the head. It is the usual fully threaded hex bolt, corresponding to ISO 4017 and GB/T 5783.

AT A GLANCE

Key facts

Standard
DIN 933
Family
Bolts & threaded rods
Equivalent standards
DIN 933 · ISO 4017 · GB/T 5783
Common materials
Carbon steel, 304 stainless steel, Galvanized steel
Common finishes
Zinc plated, Hot-dip galvanized, Plain
Typical applications
Construction & steelwork, Machinery & equipment, Power & utilities

What this standard covers

A hexagon head bolt threaded along the whole shank, up to the underside of the head. It is the usual fully threaded hex bolt, corresponding to ISO 4017 and GB/T 5783.

How it differs from the closest standard

Its closest relative is DIN 931 (ISO 4014), which leaves an unthreaded shank between head and thread. The full thread covers a wider range of clamped lengths, but leaves no plain shank to bear in a shear joint.

Equivalent standards

DIN ISO GB/T
DIN 933 ISO 4017 GB/T 5783

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 933?

A hexagon head bolt threaded along the whole shank, up to the underside of the head. It is the usual fully threaded hex bolt, corresponding to ISO 4017 and GB/T 5783.

What are the equivalent standards for DIN 933?

DIN 933 · ISO 4017 · GB/T 5783. Its closest relative is DIN 931 (ISO 4014), which leaves an unthreaded shank between head and thread. The full thread covers a wider range of clamped lengths, but leaves no plain shank to bear in a shear joint.

Can you supply DIN 933 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Hot-dip galvanized, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.