STANDARD / ISO 7380

ISO 7380 — Socket button head screw

A screw with a low domed head and an internal hex socket, fully threaded, chosen where a standard head would stand too proud. ISO 7380 and GB/T 70.2 are the usual equivalents; the product has no DIN number of its own.

AT A GLANCE

Key facts

Standard
ISO 7380
Family
Screws
Equivalent standards
ISO 7380 · GB/T 70.2
Common materials
Carbon steel, 304 stainless steel
Common finishes
Black oxide, Zinc plated, Passivated
Typical applications
Machinery & equipment, Furniture & joinery, Automotive & aftermarket

What this standard covers

A screw with a low domed head and an internal hex socket, fully threaded, chosen where a standard head would stand too proud. ISO 7380 and GB/T 70.2 are the usual equivalents; the product has no DIN number of its own.

How it differs from the closest standard

Against the DIN 912 cap screw, the button head is lower and rounder and the hex socket is smaller, so it suits light clamping and limited head height rather than high preload. It also leaves a smooth domed top instead of a flat machined face.

Equivalent standards

DIN ISO GB/T
— ISO 7380 GB/T 70.2

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is ISO 7380?

A screw with a low domed head and an internal hex socket, fully threaded, chosen where a standard head would stand too proud. ISO 7380 and GB/T 70.2 are the usual equivalents; the product has no DIN number of its own.

What are the equivalent standards for ISO 7380?

ISO 7380 · GB/T 70.2. Against the DIN 912 cap screw, the button head is lower and rounder and the hex socket is smaller, so it suits light clamping and limited head height rather than high preload. It also leaves a smooth domed top instead of a flat machined face.

Can you supply ISO 7380 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, with Black oxide, Zinc plated, Passivated. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.