What this standard covers
A screw with a drill point that bores its own hole in sheet metal and then forms the mating thread, so no pilot hole is drilled. DIN 7504 covers the hex head (K), pan head (M) and countersunk (P) forms; it has no ISO or GB equivalent in this cross-reference.
How it differs from the closest standard
Compared with a self-tapping screw to DIN 7981 or DIN 7982, which needs a drilled pilot hole, the drill point makes the screw independent of a pre-drilled hole but ties the hole size to the screw. The two are not interchangeable in the same joint.
Equivalent standards
| DIN | ISO | GB/T |
|---|---|---|
| DIN 7504 | — | — |
How to specify it
- Send the standard number or drawing, including the edition you need.
- Confirm material, property class and finish.
- Confirm sizes, thread length, quantity and packing.
- Approve the sample or PO before production.
Questions buyers ask
What is DIN 7504?
A screw with a drill point that bores its own hole in sheet metal and then forms the mating thread, so no pilot hole is drilled. DIN 7504 covers the hex head (K), pan head (M) and countersunk (P) forms; it has no ISO or GB equivalent in this cross-reference.
What are the equivalent standards for DIN 7504?
DIN 7504. Compared with a self-tapping screw to DIN 7981 or DIN 7982, which needs a drilled pilot hole, the drill point makes the screw independent of a pre-drilled hole but ties the hole size to the screw. The two are not interchangeable in the same joint.
Can you supply DIN 7504 in 304 stainless or hot-dip galvanized?
Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.