STANDARD / DIN 7337

DIN 7337 — Blind rivet

A two-part rivet: a hollow body with a mandrel through it. The tool pulls the mandrel, which upsets the body on the far side and then breaks off, so the joint is closed from one side. DIN 7337 covers dome and countersunk heads.

AT A GLANCE

Key facts

Standard
DIN 7337
Family
Rivets
Equivalent standards
DIN 7337
Common materials
Carbon steel, 304 stainless steel, Galvanized steel
Common finishes
Zinc plated, Plain
Typical applications
Construction & steelwork, Automotive & aftermarket, General industry & MRO

What this standard covers

A two-part rivet: a hollow body with a mandrel through it. The tool pulls the mandrel, which upsets the body on the far side and then breaks off, so the joint is closed from one side. DIN 7337 covers dome and countersunk heads.

How it differs from the closest standard

A solid rivet such as DIN 660 needs access to both sides and is set by hammering or squeezing. The blind rivet is set with a hand or power tool from the front only, and the mandrel head stays inside the body after it breaks.

Equivalent standards

DIN ISO GB/T
DIN 7337 — —

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 7337?

A two-part rivet: a hollow body with a mandrel through it. The tool pulls the mandrel, which upsets the body on the far side and then breaks off, so the joint is closed from one side. DIN 7337 covers dome and countersunk heads.

What are the equivalent standards for DIN 7337?

DIN 7337. A solid rivet such as DIN 660 needs access to both sides and is set by hammering or squeezing. The blind rivet is set with a hand or power tool from the front only, and the mandrel head stays inside the body after it breaks.

Can you supply DIN 7337 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.