STANDARD / DIN 935

DIN 935 — Castle nut

A hex nut with slots cut across the top, used with a drilled bolt shank and a split pin so the pin locks the nut mechanically. GB/T 6178 is the Chinese reference; there is no common ISO equivalent.

AT A GLANCE

Key facts

Standard
DIN 935
Family
Nuts
Equivalent standards
DIN 935 · GB/T 6178
Common materials
Carbon steel, 304 stainless steel
Common finishes
Zinc plated, Hot-dip galvanized, Plain
Typical applications
Machinery & equipment, Automotive & aftermarket, General industry & MRO

What this standard covers

A hex nut with slots cut across the top, used with a drilled bolt shank and a split pin so the pin locks the nut mechanically. GB/T 6178 is the Chinese reference; there is no common ISO equivalent.

How it differs from the closest standard

It is taller than a DIN 934 nut and carries slots instead of relying on friction, so the lock depends on the split pin passing through the bolt. The bolt must therefore be drilled at the right position, and the nut position is set by the slot rather than by preload alone.

Equivalent standards

DIN ISO GB/T
DIN 935 — GB/T 6178

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 935?

A hex nut with slots cut across the top, used with a drilled bolt shank and a split pin so the pin locks the nut mechanically. GB/T 6178 is the Chinese reference; there is no common ISO equivalent.

What are the equivalent standards for DIN 935?

DIN 935 · GB/T 6178. It is taller than a DIN 934 nut and carries slots instead of relying on friction, so the lock depends on the split pin passing through the bolt. The bolt must therefore be drilled at the right position, and the nut position is set by the slot rather than by preload alone.

Can you supply DIN 935 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, with Zinc plated, Hot-dip galvanized, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.