STANDARD / DIN 985

DIN 985 — Nylon-insert lock nut

A hex nut with a nylon ring held in the upper part; the bolt thread cuts into the insert, and the resulting friction resists loosening under vibration. ISO 10511 and GB/T 889.1 are the usual equivalents.

AT A GLANCE

Key facts

Standard
DIN 985
Family
Nuts
Equivalent standards
DIN 985 · ISO 10511 · GB/T 889.1
Common materials
Carbon steel, 304 stainless steel
Common finishes
Zinc plated, Hot-dip galvanized, Passivated
Typical applications
Machinery & equipment, Automotive & aftermarket, Construction & steelwork

What this standard covers

A hex nut with a nylon ring held in the upper part; the bolt thread cuts into the insert, and the resulting friction resists loosening under vibration. ISO 10511 and GB/T 889.1 are the usual equivalents.

How it differs from the closest standard

Compared with a DIN 934 nut it is taller, because the body has to hold the insert above the thread. The locking element is a friction insert rather than a spring washer or a split pin, and the nut runs on by hand until it reaches the insert.

Equivalent standards

DIN ISO GB/T
DIN 985 ISO 10511 GB/T 889.1

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 985?

A hex nut with a nylon ring held in the upper part; the bolt thread cuts into the insert, and the resulting friction resists loosening under vibration. ISO 10511 and GB/T 889.1 are the usual equivalents.

What are the equivalent standards for DIN 985?

DIN 985 · ISO 10511 · GB/T 889.1. Compared with a DIN 934 nut it is taller, because the body has to hold the insert above the thread. The locking element is a friction insert rather than a spring washer or a split pin, and the nut runs on by hand until it reaches the insert.

Can you supply DIN 985 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, with Zinc plated, Hot-dip galvanized, Passivated. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.