STANDARD / DIN 6325

DIN 6325 — Dowel pin

A solid, hardened and ground cylindrical pin with chamfered ends, used to locate and align two parts and held by an interference fit in a reamed hole. ISO 8734 is the usual equivalent.

AT A GLANCE

Key facts

Standard
DIN 6325
Family
Pins
Equivalent standards
DIN 6325 · ISO 8734
Common materials
Carbon steel, 304 stainless steel
Common finishes
Plain, Black oxide
Typical applications
Machinery & equipment, Automotive & aftermarket, General industry & MRO

What this standard covers

A solid, hardened and ground cylindrical pin with chamfered ends, used to locate and align two parts and held by an interference fit in a reamed hole. ISO 8734 is the usual equivalent.

How it differs from the closest standard

Against the DIN 1481 spring pin, it is solid with a ground diameter, so it holds a precise position instead of absorbing tolerance. It needs a reamed hole and is removed by pressing or drilling, where a spring pin can be driven out and reused.

Equivalent standards

DIN ISO GB/T
DIN 6325 ISO 8734 —

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 6325?

A solid, hardened and ground cylindrical pin with chamfered ends, used to locate and align two parts and held by an interference fit in a reamed hole. ISO 8734 is the usual equivalent.

What are the equivalent standards for DIN 6325?

DIN 6325 · ISO 8734. Against the DIN 1481 spring pin, it is solid with a ground diameter, so it holds a precise position instead of absorbing tolerance. It needs a reamed hole and is removed by pressing or drilling, where a spring pin can be driven out and reused.

Can you supply DIN 6325 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, with Plain, Black oxide. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.