STANDARD / DIN 9021

DIN 9021 — Large flat washer

A flat washer with a larger outside diameter than the standard series for the same hole, used to spread load on soft material and to bridge slots or oversized holes. ISO 7093 and GB/T 96.1 are the usual equivalents.

AT A GLANCE

Key facts

Standard
DIN 9021
Family
Washers
Equivalent standards
DIN 9021 · ISO 7093 · GB/T 96.1
Common materials
Carbon steel, 304 stainless steel, Galvanized steel
Common finishes
Zinc plated, Hot-dip galvanized, Plain
Typical applications
Construction & steelwork, Furniture & joinery, General industry & MRO

What this standard covers

A flat washer with a larger outside diameter than the standard series for the same hole, used to spread load on soft material and to bridge slots or oversized holes. ISO 7093 and GB/T 96.1 are the usual equivalents.

How it differs from the closest standard

The difference from DIN 125 is the outside diameter for the same bolt size, not the hole. The wider face lowers contact pressure on a soft or thin part and covers a slot, but it needs more clearance around the fastener.

Equivalent standards

DIN ISO GB/T
DIN 9021 ISO 7093 GB/T 96.1

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 9021?

A flat washer with a larger outside diameter than the standard series for the same hole, used to spread load on soft material and to bridge slots or oversized holes. ISO 7093 and GB/T 96.1 are the usual equivalents.

What are the equivalent standards for DIN 9021?

DIN 9021 · ISO 7093 · GB/T 96.1. The difference from DIN 125 is the outside diameter for the same bolt size, not the hole. The wider face lowers contact pressure on a soft or thin part and covers a slot, but it needs more clearance around the fastener.

Can you supply DIN 9021 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Hot-dip galvanized, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.