STANDARD / DIN 125

DIN 125 — Flat washer

A flat circular washer placed under a hex bolt head or nut to spread the clamp load and protect the bearing surface. ISO 7089 and GB/T 97.1 are the usual equivalents.

AT A GLANCE

Key facts

Standard
DIN 125
Family
Washers
Equivalent standards
DIN 125 · ISO 7089 · GB/T 97.1
Common materials
Carbon steel, 304 stainless steel, Galvanized steel
Common finishes
Zinc plated, Hot-dip galvanized, Passivated, Plain
Typical applications
Construction & steelwork, Machinery & equipment, General industry & MRO

What this standard covers

A flat circular washer placed under a hex bolt head or nut to spread the clamp load and protect the bearing surface. ISO 7089 and GB/T 97.1 are the usual equivalents.

How it differs from the closest standard

Against DIN 9021 it is the standard series: the outside diameter is matched to the bearing face of the hex head or nut it serves. DIN 9021 uses a clearly larger outside diameter for soft material, slots or oversized holes.

Equivalent standards

DIN ISO GB/T
DIN 125 ISO 7089 GB/T 97.1

How to specify it

  1. Send the standard number or drawing, including the edition you need.
  2. Confirm material, property class and finish.
  3. Confirm sizes, thread length, quantity and packing.
  4. Approve the sample or PO before production.

Questions buyers ask

What is DIN 125?

A flat circular washer placed under a hex bolt head or nut to spread the clamp load and protect the bearing surface. ISO 7089 and GB/T 97.1 are the usual equivalents.

What are the equivalent standards for DIN 125?

DIN 125 · ISO 7089 · GB/T 97.1. Against DIN 9021 it is the standard series: the outside diameter is matched to the bearing face of the hex head or nut it serves. DIN 9021 uses a clearly larger outside diameter for soft material, slots or oversized holes.

Can you supply DIN 125 in 304 stainless or hot-dip galvanized?

Subject to confirmation. Common materials include Carbon steel, 304 stainless steel, Galvanized steel, with Zinc plated, Hot-dip galvanized, Passivated, Plain. Tell us the service environment and corrosion requirement so the combination can be checked.

Reference

Have a drawing? Send it.

Tell us the standard, material, finish and quantity. We will confirm the specification before quoting — and tell you plainly if something does not fit.