Finishes

Hot-dip galvanizing

A coating process in which a steel part is dipped in molten zinc, forming a thick, metallurgically bonded layer that protects it outdoors.

Hot-dip galvanizing forms zinc–iron layers that are bonded to the steel rather than sitting on top of it, so the coating resists abrasion and lasts well in outdoor and wet service. It is common for pole hardware, guardrails, anchor plates and structural connections.

The coating is much thicker than zinc plating and changes the thread fit, so nuts are often tapped oversize or supplied with a matching galvanized finish. Confirm the coating standard, the thread allowance and the nut and washer finish together, and do not assume a galvanized bolt will assemble with a standard plated nut.

Questions buyers ask

What is Hot-dip galvanizing?

A coating process in which a steel part is dipped in molten zinc, forming a thick, metallurgically bonded layer that protects it outdoors.

What standards or terms are related to Hot-dip galvanizing?

Also called: HDG, Hot-dip galvanised. Related terms: Galvanized steel, Wedge anchor, Zinc plating. Related standards: ISO 4042, ISO 1461, ASTM B633. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Finishes

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.