Anchors

Chemical anchor

An anchor that bonds a threaded rod or stud into a drilled hole using a chemical adhesive, usually a two-part resin.

A chemical anchor spreads load along the bonded length instead of concentrating it at an expansion clip, which helps in close spacing, near edges and in cracked concrete when the system is approved for that use. The adhesive also seals the hole and protects the rod from moisture.

Performance depends heavily on installation: the hole must be cleaned as specified, the resin must be mixed and cured within its temperature window, and the rod and adhesive should come from the same approved system. Confirm the approval, the cure time at the site temperature and the rod grade before ordering.

Questions buyers ask

What is Chemical anchor?

An anchor that bonds a threaded rod or stud into a drilled hole using a chemical adhesive, usually a two-part resin.

What standards or terms are related to Chemical anchor?

Also called: Adhesive anchor, Resin anchor. Related terms: Threaded rod, Wedge anchor. Related standards: ETA/ETAG 001, ASTM E488. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Anchors

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.