Bolts

Threaded rod

A length of round bar threaded along its full length, used to join parts, set anchors or support pipework.

A threaded rod, also called all-thread, is a straight bar with a thread running over its entire length. It is cut to length on site and used with nuts and washers to join parts, hang supports, brace structures or set anchors. Because it has no head, the usable length is limited only by what is supplied or by adding a coupling nut.

Confirm the thread series and pitch, the property class and the coating, and state whether the ends need chamfering or protection after cutting. For structural or lifting use, the class and traceability matter more than price. A rod cut on site exposes bare steel at the ends, which is usually the first place to rust.

Questions buyers ask

What is Threaded rod?

A length of round bar threaded along its full length, used to join parts, set anchors or support pipework.

What standards or terms are related to Threaded rod?

Also called: all-thread, threaded bar. Related terms: Hex nut, Property class, Thread pitch. Related standards: DIN 975, DIN 976. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Bolts

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.