A property class is written as two numbers separated by a dot and marked on the head of the fastener. The first number reflects the nominal tensile strength, the second the ratio of yield strength to tensile strength. Diameter, length and thread say nothing about strength, so the head marking is the only reliable way to tell two visually identical bolts apart.
For a buyer, the class belongs on the drawing and on the purchase order, together with the standard it is measured against. Confirm that the delivered parts carry the correct head marking, and that the nut class matches the bolt class, because a high-strength bolt paired with a soft nut will fail at the nut. If the drawing omits a class, ask the engineer rather than ordering the cheapest option.