A rivet nut, also called a blind nut or nutsert, is set by pulling a mandrel that collapses the nut’s shank against the back of the sheet. The result is a permanent, load-bearing thread in thin sheet where tapping is impractical and the reverse side cannot be reached. It is widely used in enclosures, panels and tubular frames.
Selection depends on sheet thickness, hole size, material and the expected load, so send these details rather than the thread alone. Confirm whether a flush or protruding head is needed, and whether the installed nut must be sealed against water. Setting tooling matters too: an incorrect stroke can damage the thread or leave the nut loose.