Nuts

Weld nut

A nut designed to be welded onto a sheet or plate so that a thread is available where the material cannot be tapped.

A weld nut is fixed permanently to a plate or sheet by welding, providing a reusable thread where the material is too thin to tap or where the back face is inaccessible. Projection weld nuts with locating pins or tabs are common in sheet-metal fabrication, while heavier hex weld nuts suit thicker plate and structural work.

Weldability depends on the base material and on the nut’s own steel, so confirm both rather than matching thread size alone. Check the weld projections, the pilot hole and the welding method the fabricator uses. Coating is usually applied after welding, or the weld area is left bare, so agree the finish sequence before production.

Questions buyers ask

What is Weld nut?

A nut designed to be welded onto a sheet or plate so that a thread is available where the material cannot be tapped.

What standards or terms are related to Weld nut?

Also called: projection weld nut, spot weld nut. Related terms: Carbon steel, Hex nut, Rivet nut. Related standards: DIN 934, ISO 4032, GB/T 6170. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Nuts

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.