A self-tapping screw cuts or forms a thread as it is driven into a pre-drilled hole, or in some materials into an unpunched pilot. Unlike a self-drilling screw it does not drill its own hole in metal, so the hole size has to suit both the screw and the material. It is widely used in sheet metal, plastics and light assembly.
Hole size is the usual cause of failure: too large and the screw strips out, too small and it twists off or cracks the part. Confirm the material, its thickness and whether the joint will be taken apart more than once. Specify the head, thread type and coating together, since these decide both holding power and appearance.