Screws

Socket head cap screw

A screw with a cylindrical head and an internal hex socket, tightened with an Allen key and used where a strong, compact, recessed fastening is required.

The socket drive lets a relatively small head transmit high torque, so a cap screw can clamp harder than a screw of the same size with a slotted or cross recess. The cylindrical head also seats in a counterbore, which protects the drive and keeps the joint surface flush.

Because the head is not a hexagon, the length is measured from under the head, and the counterbore and tapped hole must match the head diameter and the thread. Confirm the property class, thread tolerance and coating on the order, and check that the counterbore is deep enough for the head rather than assuming a standard cap screw will sit flush.

Questions buyers ask

What is Socket head cap screw?

A screw with a cylindrical head and an internal hex socket, tightened with an Allen key and used where a strong, compact, recessed fastening is required.

What standards or terms are related to Socket head cap screw?

Also called: SHCS, Allen bolt, Socket screw. Related terms: Property class, Tolerance class. Related standards: DIN 912, DIN 7504, ISO 4762. Confirm the exact standard, material and finish against the drawing or inquiry.

Related terms

Screws

Turn the term into an exact specification.

Send the standard, drawing or sample and we will confirm material, grade, finish and packing.