المصطلحات

مصطلحات المثبتات، بشرح مبسّط.

تعريفات واضحة للمعايير والمواد والقطع التي يتعامل معها المشترون يومياً، مكتوبة لتُقتبس.

50 مصطلحاً DIN · ISO · GB/T

تُنشر مصطلحات القاموس حالياً بالإنجليزية والصينية. يجري ترجمة بقية اللغات.

50 مصطلحاً
Bolts

Anchor bolt

A bolt designed to be fixed into concrete or masonry so that equipment, frames or structures can be attached to it.

اقرأ التعريف
Finishes

Black oxide

A conversion coating that darkens steel by forming a thin black oxide layer on the surface, with mild corrosion protection when it is oiled or waxed.

اقرأ التعريف
Pins & Rivets

Blind rivet

A rivet that can be installed from one side of a joint, where pulling a mandrel deforms the rivet body to clamp the parts together.

اقرأ التعريف
Nuts

Cap nut

A hex nut with a closed domed top that covers the bolt end, protecting the thread and giving a finished appearance.

اقرأ التعريف
Materials

Carbon steel

Steel whose main alloying element is carbon, used for most general-purpose fasteners and supplied in several strength grades.

اقرأ التعريف
Bolts

Carriage bolt

A bolt with a smooth domed head and a square neck that bites into the material to stop rotation, tightened from the nut side.

اقرأ التعريف
Nuts

Castle nut

A hex nut with slots cut across the top, locked in place by a cotter pin passing through the bolt.

اقرأ التعريف
Anchors

Chemical anchor

An anchor that bonds a threaded rod or stud into a drilled hole using a chemical adhesive, usually a two-part resin.

اقرأ التعريف
Washers

Circlip

A split ring that fits into a groove on a shaft or in a bore to locate or retain a component in the axial direction.

اقرأ التعريف
Threads

Coarse thread

The standard metric thread series with the largest pitch for a given diameter, used for general fastening.

اقرأ التعريف
Screws

Countersunk screw

A screw with a flat, conical head that sits flush with the workpiece when tightened into a matching countersink.

اقرأ التعريف
Standards

DIN standard

A German national standard issued by DIN, widely used to specify the shape and dimensions of fasteners.

اقرأ التعريف
Pins & Rivets

Dowel pin

A cylindrical pin ground to a close tolerance, used to locate or align two parts and to carry shear load.

اقرأ التعريف
Anchors

Drop-in anchor

A female-threaded expansion anchor set into a drilled hole, so a bolt or threaded rod can be installed after the anchor is fixed.

اقرأ التعريف
Bolts

Eye bolt

A bolt with a looped eye at one end instead of a head, used as an attachment point for ropes, cables or lifting gear.

اقرأ التعريف
Threads

Fine thread

A metric thread series with a smaller pitch than coarse for the same diameter, used where vibration, thin walls or adjustment matter.

اقرأ التعريف
Bolts

Flange bolt

A hex bolt with an integrated flange under the head that spreads clamping load and can replace a separate washer.

اقرأ التعريف
Washers

Flat washer

A flat ring placed under a bolt head or nut to spread the clamping load over a wider area and protect the joint surface.

اقرأ التعريف
Materials

Galvanized steel

Steel that has been coated with zinc, by hot-dip galvanizing or electroplating, to resist corrosion.

اقرأ التعريف
Standards

GB standard

The Chinese national standard system, in which GB/T denotes recommended standards and GB denotes mandatory ones.

اقرأ التعريف
Bolts

Hex bolt

A bolt with a hexagonal head driven by a wrench or socket, the most common general-purpose fastener.

اقرأ التعريف
Nuts

Hex nut

A six-sided nut turned with a wrench to clamp a joint on a bolt, stud or threaded rod.

اقرأ التعريف
Finishes

Hot-dip galvanizing

A coating process in which a steel part is dipped in molten zinc, forming a thick, metallurgically bonded layer that protects it outdoors.

اقرأ التعريف
Standards

ISO standard

An international standard published by ISO, used as the common reference for fastener dimensions, tolerances and mechanical properties.

اقرأ التعريف
Washers

Large washer

A flat washer with an outside diameter larger than a standard washer, used to cover oversize or slotted holes and spread load on soft materials.

اقرأ التعريف
Screws

Machine screw

A small screw with a uniform machine thread, used with a nut or a tapped hole rather than to cut a thread of its own.

اقرأ التعريف
Finishes

Mechanical plating

A coating process that bonds zinc or zinc-alloy powder to steel by tumbling the parts with glass beads and a promoter, producing a ductile, uniform layer.

اقرأ التعريف
Nuts

Nylon lock nut

A hex nut with a nylon insert that grips the bolt thread and resists loosening from vibration.

اقرأ التعريف
Finishes

Passivation

A chemical treatment that removes free iron from a stainless steel surface and restores its passive oxide layer to improve corrosion resistance.

اقرأ التعريف
Quality

Proof load

The tensile load a fastener must withstand without permanent deformation, used as an acceptance test for a strength class.

اقرأ التعريف
Standards

Property class

A two-number class marked on a bolt, screw or stud that sets its nominal tensile strength and yield strength.

اقرأ التعريف
Nuts

Rivet nut

A tubular nut installed by deforming its shank into a sheet, giving a load-bearing thread in thin material.

اقرأ التعريف
Screws

Self-drilling screw

A screw with a drill point that drills its own hole, forms a thread and fastens in one operation.

اقرأ التعريف
Screws

Self-tapping screw

A screw that forms or cuts its own thread in a pre-drilled hole in sheet metal, plastic or wood.

اقرأ التعريف
Screws

Set screw

A headless screw, usually driven with a hex key, that locks a hub, collar or other part against a shaft or inside a threaded hole.

اقرأ التعريف
Screws

Socket head cap screw

A screw with a cylindrical head and an internal hex socket, tightened with an Allen key and used where a strong, compact, recessed fastening is required.

اقرأ التعريف
Pins & Rivets

Spring pin

A hollow, split cylindrical pin that compresses as it is driven into a hole and holds itself in place by spring force.

اقرأ التعريف
Washers

Spring washer

A split, dished washer that stores elastic energy and is used to help keep a bolted joint from loosening under vibration.

اقرأ التعريف
Nuts

Square nut

A four-sided nut with a square outline, offering a larger bearing area and a more traditional look than a hex nut.

اقرأ التعريف
Materials

Stainless steel 304

A common austenitic stainless steel, also known as A2 or 18-8, used for fasteners where corrosion resistance matters more than high strength.

اقرأ التعريف
Bolts

T-bolt

A bolt with a T-shaped head that slides into a T-slot or channel and locks when the nut is tightened.

اقرأ التعريف
Quality

Tensile strength

The maximum stress a fastener can carry in tension before it fractures, usually expressed through a property class or in megapascals.

اقرأ التعريف
Threads

Thread pitch

The axial distance between adjacent thread crests, expressed in millimetres for metric threads.

اقرأ التعريف
Bolts

Threaded rod

A length of round bar threaded along its full length, used to join parts, set anchors or support pipework.

اقرأ التعريف
Standards

Tolerance class

The permitted range of dimensional and thread deviation for a fastener, expressed as a product grade or a thread tolerance band.

اقرأ التعريف
Bolts

U-bolt

A U-shaped bolt threaded at both ends, used with a saddle or plate and two nuts to clamp pipes, rods or tubes.

اقرأ التعريف
Anchors

Wedge anchor

A mechanical anchor for concrete in which a tapered wedge expands a clip against the hole wall as the nut is tightened.

اقرأ التعريف
Nuts

Weld nut

A nut designed to be welded onto a sheet or plate so that a thread is available where the material cannot be tapped.

اقرأ التعريف
Screws

Wood screw

A screw with a tapered shank, coarse thread and sharp point that cuts its own path into timber instead of threading into a tapped hole.

اقرأ التعريف
Finishes

Zinc plating

An electroplated zinc coating that gives steel fasteners moderate corrosion protection with a thin, uniform finish.

اقرأ التعريف

المصطلحات

Need a standard or material checked?

Send the drawing or specification and we will confirm the exact standard, material and supply conditions.